STOVES / DUNSLEY
HOW IT WORKS:
The highlander has two controls. The one above the main door controls the amount of air required for the air wash system by sliding to open the air inlet holes which then pre-heat the air before directing down over the inside of the glass. This keeps the product of combustion away from the glass and increases efficiency.
The control below the main door is to adjust the amount of air required for combustion purposes. The most suitable setting will quickly be found for the various fuels you burn by moving the slide slowly to the right for more air to the left for less air.
BEFORE YOU DECIDE
Of course, we would like you to chose a Dunsley 'Highlander' stove - before you do, may we suggest you check the following advantages.
*Fitted with cast iron multi fuel riddling grate as standard to burn wood and all solid fuels except Petroleum Coke.
*Chrome iron grate bars are available, as an optional extra, for those who wish to burn Petroleum Coke.
*Very efficient air wash, which also improves fuel efficiency.
*Automatic door safety device.
*Easy clean throat plate.
*3 Year guarantee.
*Optional, detachable canopy.
Highlander 3
As with the Highlander-7 and 5 the Highlander-3 has been designed to give you cleaner burn and superb efficiency. Its slim appearance and superb air wash gives it an appearance to be desired. The air wash and primary air controls are designed to be precisely controlled, to allow maximum efficiency to be obtained and control outputs to your requirements. The Highlander-3 is also fitted as standard with a superb shaker grate. This enables logs or any other solid fuel to be burnt at maximum efficiency and is very easy and clean to operate. A non shaker grate model is also available, with the design advantages of the Highlander-3 but without the shaker mechanism. This gives you a very good stove at a reduced price. You will of course have to de-ash as required with the hooked poker provided.
The Highlander-3 is available with matching canopy, on request. This can be removed or replaced at any time. The Highlander-3 has interchangable top or rear flue outlets fitted as standard, to take 125mm flue pipe.
The Highlander-3 has been designed with one door to open for re-fuelling and ash removal, therefore no safety precautions are necessary to prevent overfiring of fuel when removing ash from below the grate. The Highlander-3 will take logs up to 200mm (8") long. The super air wash system has been designed tp keep the glass clean to give a full view of the superb flame pattern, created as the flames rise to meet the incoming air, thus causing secondary combustion to take place. A steel boiler or stainless steel boiler is also available. This takes the place of the rear firebrick and can be installed by Dunsley if ordered with the stove, or can be fitted at a later date if required.
Highlander 5
The Highlander-5 has been developed to increase the choice of the Householder, using the same superb burning technology as the Highlander-7. Same air wash system. Same shaker gate system only slightly smaller, but can still take logs up to 280mm long. Same range of suitable fuel. Same metallic black finish. Solid brass handles as standard, with black handles available on request.
The Highlander-5 is different from the Highlander-& as follows - the overall size is smaller, this has enabled the design of the door to be altered, so that on the Highlander-5 there is only one door to open for re-fuelling and removing ashes. This also means that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS
The Highlander-5 has two combustion controls exactly as the Highlander-7, to control the burning rate, with efficiencies of up to 70 percent. The Highlander-5 is also available with steel or Stainless Steel 2KW Boiler.
Highlander 5 Enviroburn
CLEAN AND CLEAR
Enviro-burn clean combustion and airwash air supply mean a clear view of the flames.
HETAS APPROVED
The Highlander Enviro-burn 5 is a free standing stove approved to burn wood logs in smoke control areas. The appliance is constructed from 4 and 10mm steel and cast iron. It incorporates both rear and a top flue outlet. The firebox is lined at the sides back and top by "800Kq/m3 density ceramic fiber refractory boards" and comes with a black metallic finish. You have a choice of black, brass or polished steel handles. A canopy can be supplied on request.
The Highlander Enviro-burn 5 has only one door to open for re-fuelling and removing ashes. This also means that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS
The Highlander Enviro-burn 5 has two combustion controls. The most ideal setting will quickly be found moving the slide slowly to find the most suitable position. Using the correct rate of burning efficiencies of up to 78.9% burning wood logs can be achieved.
Highlander 7
The Highlander-7 meets the standards of the relevant British Standards for the whole of the UK. Also meets the requirements of the Scotland Building Regulations 199 Part F.
The Highlander-7 has been developed using the best burning technology to give you a stove with a clean burn and high efficiency.
The Super Air Wash System has been designed to keep the glass clean to give a full view of the superb plane pattern created as the flames rise to meet the incoming air, this causes secondary combustion to take place, resulting in clean burn with dancing flames. The highlander has also a superb shaker grate mechanism which allows you to set the grate for efficient wood burning (large logs up to 360mm long) or any other solid fuel including peat, coal, coal briquettes and of course all HETAS approved smokeless fuels. Finished in heat resistant metallic black stove enamel paint and fitted with solid brass handles, black handles are available on request.
How It Works
The Highlander has two controls. The one above the main door controls the air wash system. By sliding the left to close, right to open the air inlet holes, which then preheats the air before directing it down over the inside of the ceramic glass. This keeps the products of combination away from the glass and also creates secondary combustion to increase efficiency and reduce smoke emission from the flue.
The control below the main door is to adjust the amount of air required for easy lighting and rapid warm up, this also controls the flow of air for varying fuels as required. The most suitable setting will quickly be found. Move the slide slowly to find the suitable position. Using the correct rate of burning, efficiencies of up to 70% can be obtained.
• An automatic door safety device is fitted which prevents the bottom door opening before the top door is open. This prevents serious overtiring when removing ashes from below the grate
• The Highlander-7 is available with steel or Stainless Steel 3KW Boiler. See below for code number.
• The Highlander-7 and 5 are available with matching canopy on request, this can be removed or replaced at any time.
• Both the Highlander-7 and 5 are also available with top or rear flue outlet.
Highlander 8 & Double Sided 8
What sets the Highlander-8 apart from the 3, 5 and 7 are the two cast iron doors with large viewing windows, clean lines and a classic appearance. A wide door opening and large fire bed capacity, enables you to load the fire box with good sized logs of up to 460mm or 18" in length.
The Highlander-8 has a superb air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface of the glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed down for overnight burning of fossil fuels.
With a heat output of 7 - 8 kW maximum the Highlander-8 will heat a medium to large room.
The grate mechanism can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. There is a choice of boiler, which is available in steel or stainless steel if required to connect into a direct hot water cylinder. This takes the place of the rear fire brick and can be installed at the factory or at a later date if required. See below for product code numbers.
The Highlander-8 is available with black, brass or polished steel knobs and is finished in black metallic paint.
The Highlander 8 Double fronted stove is ideal for homes and pubs, or hotels that have, or wish to create a central chimney room setting as a focal point. If you are interested in a double fronted stove please contact us as these stoves are built to order.
Highlander 8 Boiler
The Highlander-8 is fitted with a fully integral boiler for central heating, capable of running up to eight average sized radiators, plus domestic hot water as well as providing heat into the room. The boiler output is controlled by a manual slide on the front of the stove, and manufactured to the same high standard that Dunsley have maintained for the past 50 years.
Using the same Multi-fuel fuel as in our range of stoves which allow wood or peat to be burnt on a flat bed, or moving the grate into an open position converts the grate for burning other fuels.
The Highlander 8 C.H. is available with black, brass or polished steel knob, and finished in black metallic paint.
The Highlander 8 C.H. is available only with a top flue connection.
Highlander 10
The new Highlander-10 stove is a wide version of the popular Highlander 8 model, with the same burning control system but nearly 100mm wider than the 8 and with a fuel box area to take logs up to 550mm long, this makes the Highlander-10 more suitable for larger rooms
The Highlander-10 has a superb air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface of the glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed down for overnight burning of fossil fuels.
With a heat output of 9 - 10 kW maximum the Highlander-10 will easily heat larger rooms.
The grate mechanism can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. There is a choice of boiler, which is available in steel or stainless steel if required to connect into a direct hot water cylinder. This takes the place of the rear fire brick and can be installed at the factory or at a later date if required. See below for product code numbers.
The Highlander-10 is available with black, brass or polished steel knobs and is finished in black metallic paint.
Highlander 10 Boiler
The new Highlander-10 stove is a wide version of the popular Highlander 8 model, with the same burning control system but nearly 100mm wider than the 8 and with a fuel box area to take logs up to 550mm long, this makes the Highlander-10 more suitable for larger rooms
The Highlander 10 has a built in thermostat which automatically monitors the central heating temperature and controls the incoming air to regulate how the fire burns to meet the central heating requirements.
The Highlander 10 can be supplied with an external air intake pipe which is fitted to the air box underneath the stove, this allows combustion air to be taken from outside the building. If this method is used no extra air vents into the room are required.
The Highlander 10 is available with black, brass or polished steel door handle finished in black metallic matt paint.
